Wall holder with fixing points on both sides.

Wall holder FPH

This system allows the user to compensate the tolerance of the substrate. Wall holders and vertical profiles are attached using connectors (such as blind rivets). The wall holders are attached to the substrate using steel anchors or frame anchors.
ProduktvarianterDownload billede

Produktvarianter

Filter
Filter
10 Produktvariant(er)
Længde
Højde
System
Antal
GTIN (EAN-Code)
Set 10 af 10 variant(er)

Fordelene / Produktbeskrivelse

Fordele
  • The wall holder is used to absorb and transfer the loads applied to the façade system.
  • They compensate the tolerance of the substrate.
  • Available as fixed and sliding point anchors.
  • Absorption of thermal longitudinal expansion through slots on the sliding point anchor.

Samlevejledning

Funktionsmåde
  • Vertical load transfer.
  • Absorption of higher loads through double-sided attachment.
  • Tolerance compensation for structural tolerances.
  • Easy installation with attachments on both sides.
Mounting Strip 1 Picture
1 / 4
cd-green-58bb58464c-vq6sw